Type: acrylic copolymer latex Uses: used for surface indoor walls, ceilings and other hard board, soft board, asbestos and so on. Gloss: all dumb Color: White Features: economic; washable wipe. With mildew resistance; ease of administration. Application matters: Method: You can brush, roller or spray consumption of paint: the theoretical value --12.7 m 2 / liter (30 microns thick dry film) the actual value --10.2 m 2 / liter (30 microns thick dry film ) Dilution: dilute with water surface pre-treatment: Make sure the surface is clean, dry and free of grease, algae, mildew, and other foreign objects. Painted surfaces to remove old paint unstable. Never paint over the new surface, the first "Wing Lai" aqueous or oil seal wall paint primer to get the best results with the state legislature. Preparation of liquid paint: a first layer of liquid paint may be painted diluted 15% water, after each coating liquid paint can was diluted with 10% water. Construction temperature: above 5 ℃ Drying time: Touch dry Hard dry --10 minutes - 30 minutes recoat time: 2 hours cleaning tools: All tools must be immediately cleaned with water after use. Storage: Store in above 0 ℃, 35 ℃ below ambient. The remaining paint after re-sealed tightly and store in a cool, clean, dry place, dust and dirt will paint deterioration, shorten its storage life. Common parameters: Solids: 36 ± 2.0 volume accounted proportion: 1.45 ± 0.03 kg / liter (white) Viscosity: 105 ± 2ku (K value)